5 Using the Control Software
5.3 Software Interface
46
Save
Saves the program in the currently active Program Editing window,
using its current name.
Save as
Saves the program in the currently active Program Editing window,
under a new name that you specify.
Prints the NC program in the currently active Program Editing
window.
Print setup
Opens the Print Setup window in which you can set up a printer for
printing NC programs.
Choose machine
For selecting which NC machine configuration is in use.
3.3.4 Configuring the Software, pg. 25.
Save a copy of current
configuration
Saves the current machine configuration, so that you can reload it
later.
3.3.4 Configuring the Software, pg. 25.
Exit
Closes the software. If you have made any unsaved changes to an NC
program, you will be asked for confirmation before closing.
Edit
Undo
Undo the most recent editing command.
Redo
Redo the most recent Undo command.
Cut
Cut selected text to the clipboard.
Copy
Copy selected text to the clipboard.
Paste
Paste text from the clipboard into the current NC program.
Clear
Delete selected text.
Delete Line
Delete the line the cursor is currently on.
Find
Locate a sequence of characters in an NC program.
Replace
Replace one sequence of characters with another, one or more
times.
Goto Line
Jump to a particular line in the NC program.
Note: The Goto Line does not reference the "N" code in the NC file.
The line number is counted starting at one and increments in steps of
one, regardless of the numbering used in the NC code.
Renumber
Modify or insert N codes in an NC program.
Lock
Lock or unlock the Program Edit Window to prevent or allow
modification to the NC program.
Select Font
Change the font currently being used in the Program Editing window.
View
Actual Position
Open or close the Actual Position Window.
