3 Installing the Hardware and Software
3.3 Installing the Software
30
Take Note
You must have administrator access to your computer to run the Machine IP Changer
utility.
Take Note
To reconnect to the network over the LAN, you will need to restore the settings of your
LAN adapter.
Follow the procedure below to configure the IP address.
Procedure: Configuring the IP Address
1.
Run the Machine IP Configuration utility. To do so, locate the CNCBase/Motion for Intelitek CNC & Fanuc
emulator folder and click
Machine IP Configuration
.
2.
Click
Yes
if asked for permission.
3.
From the dropdown list, select the local area network or network card that you wish to use for the CNC
machine.
4.
Click
Continue
.
