Intel Xeon Processor E5-2600 Monitoring Manual Download

Page: 86 / 136

Intel® Xeon® Processor E5-2600 Product Family Uncore Performance Monitoring

Reference Number: 327043-001

PROCHOT_EXTERNAL_CYCLES

• Title:

External Prochot

• Category:

PROCHOT Events

• Event Code:

0x0A

• Max. Inc/Cyc:

Register Restrictions:

0-3

• Definition:

Counts the number of cycles that we are in external PROCHOT mode. This mode is

triggered when a sensor off the die determines that something off-die (like DRAM) is too hot and

must throttle to avoid damaging the chip.

PROCHOT_INTERNAL_CYCLES

• Title:

Internal Prochot

• Category:

PROCHOT Events

• Event Code:

0x09

• Max. Inc/Cyc:

Register Restrictions:

0-3

• Definition:

Counts the number of cycles that we are in Interal PROCHOT mode. This mode is trig-

gered when a sensor on the die determines that we are too hot and must throttle to avoid damaging

the chip.

TOTAL_TRANSITION_CYCLES

• Title:

Total Core C State Transition Cycles

• Category:

CORE_C_STATE_TRANSITION Events

• Event Code:

0x0B

• Extra Select Bit:

• Max. Inc/Cyc:

Register Restrictions:

0-3

• Definition:

Number of cycles spent performing core C state transitions across all cores.

VOLT_TRANS_CYCLES_CHANGE

• Title:

Cycles Changing Voltage

• Category:

VOLT_TRANS Events

• Event Code:

0x03

• Max. Inc/Cyc:

Register Restrictions:

0-3

• Definition:

Counts the number of cycles when the system is changing voltage. There is no filtering

supported with this event. One can use it as a simple event, or use it conjunction with the occu-

pancy events to monitor the number of cores or threads that were impacted by the transition. This

event is calculated by or'ing together the increasing and decreasing events.

VOLT_TRANS_CYCLES_DECREASE

• Title:

Cycles Decreasing Voltage

• Category:

VOLT_TRANS Events

• Event Code:

0x02

• Max. Inc/Cyc:

Register Restrictions:

0-3

• Definition:

Counts the number of cycles when the system is decreasing voltage. There is no filter-

ing supported with this event. One can use it as a simple event, or use it conjunction with the occu-

pancy events to monitor the number of cores or threads that were impacted by the transition.

VOLT_TRANS_CYCLES_INCREASE

• Title:

Cycles Increasing Voltage

• Category:

VOLT_TRANS Events

• Event Code:

0x01

• Max. Inc/Cyc:

Register Restrictions:

0-3

Summary of Contents for Xeon Processor E5-2600









































































































































Search results

Summary of Contents for Xeon Processor E5-2600

Reviews:

Related manuals for Xeon Processor E5-2600

Brands by name

Popular brands

Intel Xeon Processor E5-2600, Monitoring Manual

Search results

Summary of Contents for Xeon Processor E5-2600

Reviews:

Related manuals for Xeon Processor E5-2600

Brands by name

Popular brands