Intel Xeon Processor E5-2600 Monitoring Manual Download

Page: 125 / 136

Reference Number: 327043-001

125

Intel® Xeon® Processor E5-2600 Product Family Uncore Performance Monitoring

RING_AK_USED

• Title:

R3 AK Ring in Use

• Category:

RING Events

• Event Code:

0x08

• Max. Inc/Cyc:

Register Restrictions:

0-2

• Definition:

Counts the number of cycles that the AK ring is being used at this ring stop. This

includes when packets are passing by and when packets are being sent, but does not include when

packets are being sunk into the ring stop.

RING_BL_USED

• Title:

R3 BL Ring in Use

• Category:

RING Events

• Event Code:

0x09

• Max. Inc/Cyc:

Register Restrictions:

0-2

• Definition:

Counts the number of cycles that the BL ring is being used at this ring stop. This

includes when packets are passing by and when packets are being sunk, but does not include when

packets are being sent from the ring stop.

RING_IV_USED

• Title:

R3 IV Ring in Use

• Category:

RING Events

• Event Code:

0x0A

• Max. Inc/Cyc:

Register Restrictions:

0-2

• Definition:

Counts the number of cycles that the IV ring is being used at this ring stop. This

includes when packets are passing by and when packets are being sent, but does not include when

packets are being sunk into the ring stop. The IV ring is unidirectional. Whether UP or DN is used

is dependent on the system programming. Thereofore, one should generally set both the UP and

DN bits for a given polarity (or both) at a given time.

Table 2-128. Unit Masks for RING_AK_USED

Extension

umask

[15:8]

Description

CW_EVEN

bxxxxxxx1

Clockwise and Even:

Filters for the Clockwise and Even ring polarity.

CW_ODD

bxxxxxx1x

Clockwise and Odd:

Filters for the Clockwise and Odd ring polarity.

CCW_EVEN

bxxxxx1xx

Counterclockwise and Even:

Filters for the Counterclockwise and Even ring polarity.

CCW_ODD

bxxxx1xxx

Counterclockwise and Odd:

Filters for the Counterclockwise and Odd ring polarity.

Table 2-129. Unit Masks for RING_BL_USED

Extension

umask

[15:8]

Description

CW_EVEN

bxxxxxxx1

Clockwise and Even:

Filters for the Clockwise and Even ring polarity.

CW_ODD

bxxxxxx1x

Clockwise and Odd:

Filters for the Clockwise and Odd ring polarity.

CCW_EVEN

bxxxxx1xx

Counterclockwise and Even:

Filters for the Counterclockwise and Even ring polarity.

CCW_ODD

bxxxx1xxx

Counterclockwise and Odd:

Filters for the Counterclockwise and Odd ring polarity.

Summary of Contents for Xeon Processor E5-2600









































































































































Search results

Summary of Contents for Xeon Processor E5-2600

Reviews:

Related manuals for Xeon Processor E5-2600

Brands by name

Popular brands

Intel Xeon Processor E5-2600, Monitoring Manual

Search results

Summary of Contents for Xeon Processor E5-2600

Reviews:

Related manuals for Xeon Processor E5-2600

Brands by name

Popular brands