Intel SR1530CL - Server System - 0 MB RAM, User Manual

Page: 89 / 188

Intel
®
Server System SR1530CL / SR1530HCL / SR1530HCLS 67
8. Re-install the screw you removed in step 5. See letter “A” in the figure.
Figure 69. Removing an Add-In Card
Note: Make sure that all empty add-in card slots have filler panels installed.
9. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 62 .
10. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” on page 32 .
11. Install the server system cover. For instructions, see “Installing the Server System
Cover” on page 29 .
12. Plug all peripheral devices and the AC power cable into the server.
Installing and Removing the Server Board
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
“Removing the Server
System Cover” on page 28 .
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 31 .
5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 61 .
C
B
A
AF0009 8 4