Intel SDS2, Product Manual

Page: 62 / 100

56 Intel Server Board SDS2 Product Guide
Boot Device Priority Submenu
Use the up or down arrow keys to select a device; then press the <+> or <-> keys to move the
device higher or lower in the boot priority list.
Boot Priority Device Description
1. Removable Devises Attempts to boot from the diskette drive or
removeable device like the LS-120.
2. Hard Drive Attempts to boot from a hard drive device.
3. ATAPI CD-ROM Drive Attempts to boot from an ATAPI CD-ROM drive
containing bootable media. This entry appears if
there is a bootable CD-ROM that is in a BIOS Boot
Specification-compliant SCSI CD-ROM.
4. (any) SCSI CD-ROM Drive Attempts to boot from a SCSI CD-ROM drive.
5. PXE UNDI, PXE-2.0 Attempts to boot from a network connection.
Requires the presence of a PXE server.
Hard Drive Submenu
Choices Description
Drive 1 … To select the boot drive from this list containing all bootable devices in the system, use
the up and down arrows to highlight a device, then press the plus (+) key to move it to the
top of the list or the m inus (-) key to move it down.
Removable Devices
Choices Description
Diskette A Autodetected diskette drive
Exit Menu
You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu.
You must select one of the items from the menu or menu bar to exit.
Choices Description
Exit Saving Changes Exits after writing all modified Setup item values to NVRAM
Exit Discarding Changes Exits leaving NVRAM unmodified
Load Setup Defaults Loads default values for all Setup items
Load Custom Defaults Loads values of all Setup items from previously saved custom defaults
Discard Changes Read previous values of all Setup items from NVRAM
Save Changes Writes all Setup item values to NVRAM