Intel SDS2, Product Manual

Page: 24 / 100

18 Intel Server Board SDS2 Product Guide
Attaching the Gasket to the I/O Shield
1. Remove the two backing strips from the gasket.
2. Press the gasket onto the inside face of the I/O shield as show.
Figure 3. Attaching the Gasket to the I/O Shield
Attaching the Label to the I/O Shield
1. Remove the backing from the label included with your server board.
2. Press the label onto the outside face of the I/O shield.
Figure 4. Attaching the Label to the I/O Shield