Intel SDS2, Product Manual

Page: 22 / 100

16 Intel Server Board SDS2 Product Guide
Safety and Regulatory Compliance
See “Regulatory and Integration Information” on page 85 for product Safety and EMC regulatory
compliance information.
Intended uses : This product was evaluated for use in servers that will be installed in offices,
computer rooms, and similar locations. Other uses require further evaluation.
EMC testing : Before computer integration, make sure that the chassis, power supply, and other
modules have passed EMC testing using a server board with a microprocessor from the same
family (or higher) and operating at the same (or higher) speed as the microprocessor used on this
server board.
Server board diagram label provided : Place the label inside the chassis in an easy-to-see location,
preferably oriented similarly to the server board.
Minimum Hardware Requirements
To avoid integration difficulties and possible board damage, your system must meet the following
minimum requirements. For a list of qualified memory and chassis components see:
http://support.intel.com/support/motherboards/server/SDS2
Processor
Minimum of one 1.0 GHz Intel Pentium
III
processor with 256 cache support. For a complete list
of supported processors, see:
http://support.intel.com/support/motherboards/server/SDS2
Memory
Minimum of two identical 3.3 V, ECC, PC/133 compliant, registered SDRAM, 168-pin gold
DIMMs. Minimum size: 64 MB. DIMMs must be populated in identical pairs.
Power Supply
Minimum of 275 W with 1.2 A +5 V standby current (in order to support Wake On LAN
†
(WOL))
and 12+ V CPU power support [ATX]. You must provide standby current, or the board will not
boot.