Intel SDS2, Product Manual

Page: 13 / 100

Description 7
IDE Controller
The system includes a single channel enhanced IDE 32 bit interface controller for intelligent disk
drives with disk controller electronics onboard. The controller has a connector located on the
system board that supports a master and a slave device.
The device controls:
•
PIO, ATA-100 Synchronous DMA, and bus master IDE transfer modes
•
Ultra DMA 66 capable
•
Transfer rates up to 100 MB/s
•
Master/slave IDE mode
•
Up to two devices
USB Interface
The SDS2 Server Board provides three external USB connectors on the rear I/O panel. The external
connectors are defined by the USB Specification, Revision 1.1. One additional USB connector is
supported internally through a 10-pin header on the server board that can be cabled to a front panel
board. All four ports function identically and with the same bandwidth.