Intel SDS2, Product Manual

Page: 61 / 100

Configuration Software and Utilities 55
System Management Submenu
Feature Choices Description
BIOS Version This field is information only
Board Part Number This field is information only
Board Serial Number This field is information only
System Part Number This field is information only
System Serial Number This field is information only
Chassis Part Number This field is information only
Chassis Serial Number This field is information only
BMC Device ID This field is information only
BMC Device Revision This field is information only
BMC Firmware Revision This field is information only
BMC Firmware Bootblock Revision This field is information only
BMC Support IPMI Version This field is information only
SDR Revision This field is information only
PIA Revision This field is information only
Primary HSBP Revision This field is information only
Secondary HSBP Revision This field is information only
Console Redirection Submenu
Feature Choices Description
COM Port
Address Disabled , 3F8, 2F8, 3E8 When enabled, console redirection uses the I/O port
specified. All keyboard/mouse and video will be
directed to this port. This is designed to be used only
under DOS in text mode.
Baud Rate 9600 , 19.2k, 38.4k, 57.6K, 115.2k When console redirection is enabled, specifies the baud
rate to be used.
Flow
Control None, CTS/RTS, XON/XOFF,
CTS/RTS + CD
None disallows flow control.
CTS/RTS is hardware-based flow control.
XON/XOFF is software-based flow control.
CTS/RTS + CD is hardware-based flow control plus
Carrier Detect.
When EMP is sharing the COM port as console
redirection, the flow control must be set to CTS/RTS or
CTS/RTS+CD depending on whether a modem is used.
Boot Menu
Feature Device Description
Boot Device Priority Enters submenu
Hard Drive Enters submenu
Removable Devices Enters submenu