Intel SDS2, Product Manual

Page: 45 / 100

Upgrading 39
4. Aligning the pins of the processor with the socket, insert the processor into the socket. Lower
the locking bar completely.
Figure 21. Insert the Processor
5. Before inserting the retention clip into the heat sink slot, make sure the plastic pin located at 1
is aligned with the heat sink notch at 2 . Align the notched side of the heat sink 2 with the edge
of the socket containing the “PG370” designation 3 and place onto the processor as shown
below.
Figure 22. Attach the Heat Sink and Retention Clip