Intel® Server System R2600SR Setup and Service Guide
75
3.18.2
Removing the PDM
Follow these steps to remove the PDM:
1.
Remove the power supply units (see Section 3.13.1)
2.
Remove the PCIe* Add-in Cards in cassette (see Section 3.16.2)
3.
Remove the PCIe Add-in Cards from the PCIe* Add-in Card cassettes (see Section 3.16.3)
4.
Remove the SMM (see Section 3.14.1)
5.
Remove the EIOM (see Section 3.15.2)
6.
Remove the system fans (see Section 3.12.3)
7.
Remove PIOR, Left and PIOR, Right (see Section 3.17.2 and 3.17.3)
8.
Reinstall the empty PCIe Add-in Card cassettes (see Section 3.16.5)
3.18.3
Installing the PDM
Follow these steps to install the PDM, the shuttle components and the shuttle back into the system chassis
and return the system to service:
1.
Remove the empty PCIe* add-in card cassettes (see Section 3.16.2)
2.
Install PIOR, Left and PIOR, Right (see Section 3.17.4 and 3.17.5)
3.
Install the system fans (see Section 3.12.4)
4.
Install the EIOM (see Section 3.15.3)
5.
Install the SMM (see Section 3.14.2)
6.
Install the PCIe Add-in Cards into the PCIe add-in card cassettes (see Section 3.16.4)
7.
Install the PCIe Add-in Card cassettes (see Section 3.16.5)
8.
Install the power supply units (see Section 3.13.2)
9.
Reinstall the shuttle into the chassis (see Section 3.15.4).
10.
Reconnect the power cords and any cables that were removed.
11.
Reinstall the compute nodes into the chassis (see Section 3.1.2).
12.
Power on all the compute nodes.
Note: When returning the PDM FRU for replacement the FRU components are the PDM board, empty PCIe*
cassettes, and shuttle cage with brackets.
Summary of Contents for R2600SR Series
Page 2: ...Blank page...
