Hardware Installations and Upgrades
Intel
®
Server Chassis P4000M Service Guide
13
2
Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the “Appendix B: Safety
Information”
This document provides instructions for adding and replacing chassis components. For
instructions on replacing components on the server board, such as the processor and memory
DIMMs, see the instructions provided with the server/workstation board.
Tools and Supplies Needed
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
Needle nosed pliers
Anti-static wrist strap and conductive foam pad (recommended)
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the
chassis as it would be positioned for normal operation.
Removing and Installing the Chassis Cover
Removing the Chassis Cover
The Intel
®
Server Chassis P4000M family must be operated with the top cover in place to
ensure proper cooling. You will need to remove the top cover to add or replace components
inside of the platform. Before removing the top cover, power down the server and unplug all
peripheral devices and the AC power cable.
/
NOTE
A non-skid surface or a stop behind the chassis may be needed to prevent the chassis from sliding on
your work surface.
1. Observe the safety and ESD precautions at the beginning of this book.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the screws (see letter
A
).
5. Slide the side cover back (see letter
B
) and lift the cover outward to remove it.
Summary of Contents for P4000M
Page 14: ......
