manualshive.com logo in svg

Intel Cyclone 10 GX FPGA, User Manual

Share
Download
Intel Cyclone 10 GX FPGA User Manual Download Page 7

2 Getting Started

2.1 Installing the Quartus Prime Software

The Intel Quartus

®

 Prime design software is a multiplatform design environment that

easily adapts to your specific needs in all phases of FPGA, CPLD, and SoC designs. The

Intel Quartus Prime software delivers the highest performance and productivity for

Intel FPGAs, CPLDs, and SoCs.

Design software must enable dramatically increased design productivity in order to

take advantage of devices with multi-million logic elements with increased capabilities

that provide designers with an ideal platform to meet next-generation design

opportunities.

The new Intel Quartus Prime Design Suite

®

 design software includes everything

needed to design for Intel FPGAs, SoCs and CPLDs from design entry and synthesis to

optimization, verification and simulation. The Intel Quartus Prime Design Suite

software includes an additional Spectra-Q

®

 engine that is optimized for Intel Stratix

®

10 and future devices. The Spectra-Q engine enables new levels of design productivity

for next generation programmable devices with a set of faster and more scalable

algorithms, a hierarchical database infrastructure and a unified compiler technology.

Intel Quartus Prime Software

The Intel Quartus Prime Design Suite software is available in three editions based on

specific design requirements: Pro, Standard, and Lite Edition.

The Intel Quartus Prime Pro Edition is optimized to support the advanced features in

Intel's next generation FPGAs and SoCs.

The Intel Cyclone 10 GX FPGA is only supported on Intel Quartus Prime Pro Edition.

There is no paid license fee required for Intel Cyclone 10 GX support in Intel Quartus

Prime Pro Edition.

Included in the Intel Quartus Prime Pro Edition are the Intel Quartus Prime software,

Nios

®

 II EDS and the MegaCore IP Library.

To install Intel's development tools, download the Intel Quartus Prime Pro Edition

software from the Quartus Prime Pro Edition page from the 

Download Center

 of Intel's

website.

Related Links
Intel FPGA Download Center

UG-20105 | 2017.12.18

Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus

and  Stratix  words  and  logos  are  trademarks  of  Intel  Corporation  or  its  subsidiaries  in  the  U.S.  and/or  other

countries.  Intel  warrants  performance  of  its  FPGA  and  semiconductor  products  to  current  specifications  in

accordance with Intel's standard warranty, but reserves the right to make changes to any products and services

at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any

information,  product,  or  service  described  herein  except  as  expressly  agreed  to  in  writing  by  Intel.  Intel

customers  are  advised  to  obtain  the  latest  version  of  device  specifications  before  relying  on  any  published

information and before placing orders for products or services.

*Other names and brands may be claimed as the property of others.

ISO

9001:2008

Registered

Summary of Contents for Cyclone 10 GX FPGA


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands