manualshive.com logo in svg

Intel Cyclone 10 GX FPGA, User Manual

Share
Download
Intel Cyclone 10 GX FPGA User Manual Download Page 55

•

Detected: Displays the number of data errors detected in the hardware.

•

Inserted: Displays the number of errors inserted into the transaction stream.

•

Insert: Inserts a one-word error into the transaction stream each time you click

the button. Insert Error is only enabled during transaction performance analysis.

•

Clear: Resets the Detected errors and Inserted errors counters to zeroes.

Address Range (Bytes)

Determines the number of bytes to use in each iteration of reads and writes.

5.3.8 Power Monitor

The Power Monitor measures and reports current power information and

communicates with the Intel MAX 10 device on the board through the JTAG bus. A

power monitor circuit attached to the Intel MAX 10 device allows you to measure the

power that the FPGA is consuming.

To start the application, click the Power Monitor icon in the BTS. You can also run the
Power Monitor as a stand-alone application. The 

PowerMonitor.exe

 resides in the

<package dir>\examples\board_test_system

 directory.

Note: 

You cannot run the stand-alone power application and the BTS simultaneously. Also,

you cannot run power and clock interface at the same time.

5 Board Test System

UG-20105 | 2017.12.18

Intel

®

 Cyclone

®

 10 GX FPGA Development Kit User Guide

55

Summary of Contents for Cyclone 10 GX FPGA


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands