manualshive.com logo in svg

Intel Cyclone 10 GX FPGA, User Manual

Share
Download
Intel Cyclone 10 GX FPGA User Manual Download Page 56

Figure 19.

Power Monitor Interface

The controls on the Power Monitor are described below.

Table 20.

Power Monitor GUI

Options

Description

Graph

Displays the mA power consumption of your board over time. The green line indicates

the current value. The red line indicates the maximum value read since the last reset.

The yellow line indicates the minimum value read since the last reset.
It also displays root mean square (RMS) current, maximum and minimum numerical

power readings in mA.

Table

Displays real time values of power rails. It refreshes about every 10 seconds.
When you click some rail, the power rail will show on the Graph Chart.

Configuration

Speed Adjustment: Specifies how often to refresh the graph.
Date Record: Record real time voltage, current and power values, and save to a log

file.

Reset

Clears the graph, resets the minimum and maximum values and restarts the Power

Monitor.

Temperature

Displays the temperature of the FPGA and the development kit.

5 Board Test System

UG-20105 | 2017.12.18

Intel

®

 Cyclone

®

 10 GX FPGA Development Kit User Guide

56

Summary of Contents for Cyclone 10 GX FPGA


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands