manualshive.com logo in svg

Intel Cyclone 10 GX FPGA, User Manual

Share
Download
Intel Cyclone 10 GX FPGA User Manual Download Page 52

Port

Allows you to specify the interface to test. The following port are available to test:
•

XCVR

•

CMOS

PMA Settings

Allows you to make changes to the PMA parameters that affect the active transceiver

interface. The following settings are available for analysis:
•

Serial Loopback: Routes signals between the transmitter and receiver.

•

VOD: Specifies the voltage output differential of the transmitter buffer.

•

Pre-emphasis tap:
— 1st pre - Specifies the amount of pre-emphasis on the pre-tap of the

transmitter buffer.

— 2nd pre - Specifies the amount of pre-emphasis on the second pre-tap of the

transmitter buffer.

— 1st post - Specifies the amount of pre-emphasis on the first post tap of the

transmitter buffer.

— 2nd post - Specifies the amount of pre-emphasis on the second post tap of the

transmitter buffer.

•

Equalizer: Specifies the AC gain setting for the receiver equalizer in four stage

mode.

•

DC gain: Specifies the DC gain setting for the receiver equalizer in four stage

mode.

•

VGA: Specifies the VGA gain value.

Figure 17.

PMA Settings

Data Type

Specifies the type of data contained in the transactions. The following data types are

available for analysis.

5 Board Test System

UG-20105 | 2017.12.18

Intel

®

 Cyclone

®

 10 GX FPGA Development Kit User Guide

52

Summary of Contents for Cyclone 10 GX FPGA


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands