manualshive.com logo in svg

Intel Cyclone 10 GX FPGA, User Manual

Share
Download
Intel Cyclone 10 GX FPGA User Manual Download Page 47

The following sections describe the controls on the Flash tab

Read

Reads the flash memory on your board. To see the flash memory contents, type a

starting address in the text box and click Read. Values starting at the specified

address in the table.

Write

Writes the flash memory on your board. To update the flash memory contents, change

values in the table then press the Enter key and click Write. The application writes the

new values to flash memory and then reads the values back to guarantee that the

graphical display accurately reflects the memory contents.

Random

Starts a random data pattern test to flash memory, limited to the 512K test system

scratch page.

Increase

Starts an incrementing data pattern test to flash memory, limited to the 512K test

system scratch page.

Erase

Erases flash memory of the current sector.

Flash Memory Map

Displays the flash memory map for the development board.

5.3.5 The XCVR Tab

This tab allows you to perform loopback tests on the PCIe and SFP+ ports.

5 Board Test System

UG-20105 | 2017.12.18

Intel

®

 Cyclone

®

 10 GX FPGA Development Kit User Guide

47

Summary of Contents for Cyclone 10 GX FPGA


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands