transfers. If "off" is selected, the 486MIS
SCSI port will not check for SCSI parity.
sel_to =
0
32
64
128
This option is used to set the selection
time-out value. The values are specified
in milliseconds (ms). If not specified, the
default value of 0 will be used (when 0 ms
is selected, a value of 256 ms is actually
used). Use this option with caution since
too low a value may make some targets
not to appear to the driver.
The command line options are NOT case sensitive, and not white-space
sensitive.
486MIS System Board User's Manual Page 53
