INSTALLING A VL-BUS CARD
Carefully follow these steps to install a VL-Bus card:
1. Turn off your computer and unplug the power cord.
2. Turn off the power to all peripheral devices, such as your printer.
3. Disconnect the cables from the back of the system in order to give
more room to work. Note how all cables are connected prior to
disconnection.
4. Remove the computer's cover.
5. Choose an unused VL-Bus slot.
6. Setting the VL-Bus card according to its user's manual.
7. Holding the card at the center of the top edge, gently push straight
down with equal pressure at both ends.
8. Replace the screw to hold the card into place.
9. Replace and secure the system cover.
10.Reconnect all the wires and cables.
EQUIPMENT REQUIRED
486MIS System Board User's Manual Page 23