·
Pause -
Stops audio playing at its current position. Play will proceed
if you select
Pause
a second time or if you select
Play
.
·
Fast Forward/Fast Reverse
- Moves forward or backward from the
current track position in 15-second increments. If the new play
position crosses a track boundary,
cdplayer will
access the next or
previous track.
·
Eject -
Sends an
eject command
to the CD-ROM drive. Most drives
support a
CD
eject
function. You can select
Eject
even if a CD is
still playing.
·
Next/Previous Track -
Increases or decreases the current track
number, wrapping around to the first track from the last (or vice
versa) if necessary. If the CD is playing, play will continue at the
new track's starting location.
·
Audio Mode -
Allows you to select either
Stereo, Left Channel,
Right Channel,
or
Muted
play.
·
CD-Time
Mode _ Allows you to change the time display to
Elapsed
CD Time, EIapsed Track Time, Remaining CD Time, or
Remaining
Track Time.
·
Play Order -
Allows You to select either
Sequential
or
Shuffled
Continuous
play.
·
Quit -
Exits
cdplayer.
if a CD is playing, it will continue playing to the
end of the CD and will then stop. (You can also
exit the Program by
pressing the
Esc
key.)
You can enter the
cdplayer
utility, start playing a CD, then quit the utility
while the CD continues playing. If you re-start
cdplayer
before the CD is
finished playing, the screen will display the current playing time. You can
then switch to a different track and playing, change a
setting, or eject the CD and start playing a different one.
Page 48 486MIS System Board User's Manual