·
One IDE hard drive and one SCSI hard drive
- Install IDE hard
drive as drive C:. During system BIOS Setup, enter IDE drive type
for drive C:. Leave drive D: "
not installed
" so the 486MIS SCSI
BIOS will install the SCSI drive as drive D:
·
Two IDE hard drive and one SCSI hard drive
- Install IDE hard
drives as drive C: and drive D:. During system BIOS Setup, enter
IDE drive types for drive C: and D:. Run the
Install
program (in the
DOS/WINDOWS DRIVERS diskette).
·
Two SCSI hard drives and no IDE hard drive
- During system
BIOS Setup, set hard disk drive types for C: and D: to "
not
installed
". Enable the 486MIS SCSI BIOS through jumper block W1.
Page 26 486MIS System Board User's Manual
