CHAPTER 6: OS/2 v2.1 DRIVERS
This driver includes the following features:
1. Double word 32-bit PIO transfers with support for fast SCSI
(10MByte/second)
2. Extended BIOS translation is supported for disk capacity larger than
1Gigabyte.
3. Full support for all command line options.
INSTALLATION
1. Make a copy of OS/2 Diskette 1. Delete the file IBMSCSI.ADD from
this copy.
2. Copy the AHA152X.ADD file from the 486MIS driver diskette (OS2
subdirectory) to the root directory on the copy of OS/2 Diskette 1.
(The root directory is the first directory on the diskette.)
3. Begin OS/2 installation by inserting the Installation Diskette into drive
A and restarting the system. When prompted to insert Diskette 1,
insert the copy that you modified.
Exceptional Case for Toshiba-3401 CD-ROM
If you are installing OS/2 from Toshiba-3401 CD-ROM, these extra steps
are needed:
·
Proceed with installation from step 3 above. During hard disk
preparation, select
FAT file system
.
·
After the first phase of installation is complete, system will restart.
Boot the system with DOS diskette in drive A:. Do not let the system
boot from hard disk.
·
Go to C:\ and make the following changes to CONFIG.SYS file in root
directory using DOS EDIT program.
Change
BASEDEV=AHA152X.ADD
to
BASEDEV=AHA152X.ADD /!SN
486MIS System Board User's Manual Page 49
