background image

14

En

Connected image with AV components

• Before making any AV connections, read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed and double-checked all AV connections.
• Push plugs in all the way to make good connections (loose connections can cause noise or malfunc-

tions). 

• To prevent interference, keep audio and video cables away from power cords and speaker cables.

AV Cables and Jacks

*

Available sampling rate for PCM input signal is 32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the HDMI con-
nection.

Note

• The AV receiver does not support SCART plugs.
• The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed. 

Push plugs in all the way.

Caution

• To prevent shutter damage, hold the optical plug straight when inserting and removing.

About AV Connections

Signal

Cable

Jack

Description

Video and 
Audio

HDMI

HDMI connections can carry digital video and audio.

Video

Component video

Component video separates the luminance (Y) and color 
difference signals (P

B

/C

B

, P

R/

C

R

), providing the best pic-

ture quality (some TV manufacturers label their compo-
nent video sockets slightly differently).

Composite video

Composite video is commonly used on TVs, VCRs, and 
other video equipment.

Audio

Optical digital 
audio

Optical digital connections allow you to enjoy digital 
sound such as PCM

*

, Dolby Digital or DTS. The audio 

quality is the same as coaxial.

Coaxial digital 
audio

Coaxial digital connections allow you to enjoy digital 
sound such as PCM

*

, Dolby Digital or DTS. The audio 

quality is the same as optical.

Analog audio 
(RCA)

Analog audio connections (RCA) carry analog audio.

HDMI cable

Other cables

: Video & Audio

: Video

: Audio

Game console

Blu-ray Disc/

DVD player

TV, projector, etc.

Game console

Blu-ray Disc/

DVD player

TV, projector, etc.

AV receiver

AV receiver

Right!

Wrong!

HDMI

Y

P

B

/C

B

P

R

/C

R

Green

Blue

Red

V

Yellow

OPTICAL

Orange

L

R

White

Red

Summary of Contents for DTR-20.2









































































Reviews: