background image

34

En

Onkyo-Original DSP Listening Modes

Note

*1

If there are no surround back speakers, Dolby Pro Logic II is used. 

*2

For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.

*3

AV receiver can input the DSD signal from 

HDMI IN

. Setting the output setting on the player side to PCM might obtain a better 

sound according to the player. In that case, set the output setting on the player side to PCM.

*4

Depending on the input source, DTS is used.

*5

If there are no surround back speakers, DTS is used.

• The listening modes cannot be selected with some source formats.

Listening Mode

Description

Input 
Source

Speaker 
Layout

Orchestra

Suitable for classical or operatic music, this mode emphasizes the surround 
channels in order to widen the stereo image, and simulates the natural rever-
beration of a large hall.

A
S
D
G
H

CN

Unplugged

Suitable for acoustic instruments, vocals, and jazz, this mode emphasizes the 
front stereo image, giving the impression of being right in front of the stage.

Studio-Mix

Suitable for rock or pop music, listening to music in this mode creates a 
lively sound field with a powerful acoustic image, like being at a club or rock 
concert.

TV Logic

This mode adds realistic acoustics to TV shows produced in a TV studio, 
surround effects to the entire sound, and clarity to voices.

Game-RPG

Use this mode when playing role playing game discs.

Game-Action

Use this mode when playing action game discs.

Game-Rock

Use this mode when playing rock game discs.

Game-Sports

Use this mode when playing sports game discs.

All Ch Stereo

Ideal for background music, this mode fills the entire listening area with ste-
reo sound from the front, surround, and surround back speakers.

A
S
D
F
G
H

XCN

Full Mono

In this mode, all speakers output the same sound in mono, so the sound you 
hear is the same regardless of where you are within the listening room.

T-D (Theater-
Dimensional)

With this mode you can enjoy a virtual surround sound even with only two or 
three speakers. This works by controlling how sounds reach the listener’s left 
and right ears. Good results may not be possible if there’s too much reverb, 
so we recommend that you use this mode in an environment with little or no 
natural reverb.

ZXC
N

O r c h e s t r a

U n p l u g g e d

S t u d i o – M i x

T V

L o g i c

G a m e – R P G

G a m e – A c t i o n

G a m e – R o c k

G a m e – S p o r t s

A l l

C h

S t

F u l l

M o n o

T – D

Summary of Contents for DTR-20.2









































































Reviews: