17
En
Note
*1
Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially
available phono preamp. If your turntable has a moving coil (MC) type cartridge, you’ll need a commercially available MC head
amp or MC transformer as well as a phono preamp. See your turntable’s manual for details.
*2
When you connect your personal computer to
PC IN
and select
PC
Input selector, video of the personal computer is output from
HDMI
OUT
. However, if you have assigned
HDMI IN
to the
PC
input selector, the AV receiver will output signals from
HDMI IN
instead of signals from
PC IN
. To get the signals output from
PC IN
, select “
- - - - -
” for “
PC
” in the “
HDMI Input
” setting
(
➔
36
)
.
• With connection
C
, you can listen and record audio from the external components while you are in Zone 2. You can listen and record
audio from the external components in the main room; you can listen to the audio in Zone 2 as well.
• With connection
B
, you can enjoy Dolby Digital and DTS. (To record or listen in Zone 2 as well, use
B
and
C
.)
• With connection
C
, if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to connect the main
stereo.
■
How to record the video
With the connections described above, you cannot record the video through the AV receiver. To make a connection for
video recording (
➔
28
).
.
With
u
(Remote Interactive), you can use the following
special functions:
■
System On/Auto Power On
When you start playback on a component connected via
u
while the AV receiver is on Standby, the AV
receiver will automatically turn on and select that com-
ponent as the input source.
■
Direct Change
When playback is started on a component connected via
u
, the AV receiver automatically selects that compo-
nent as the input source.
■
Remote Control
You can use the AV receiver’s remote controller to con-
trol your other
u
-capable Integra/Onkyo components,
pointing the remote controller at the AV receiver’s
remote control sensor instead of the component. You
must enter the appropriate remote control code first
(
➔
60
).
Note
• Use only
u
cables for
u
connections.
u
cables are supplied
with Integra/Onkyo players (DVD, CD, etc.).
• Some components have two
u
jacks. You can connect either
one to the AV receiver. The other jack is for connecting addi-
tional
u
-capable components.
• Connect only Integra/Onkyo components to
u
jacks. Connect-
ing other manufacturer’s components may cause a malfunction.
• Some components may not support all functions. Refer to the
manuals supplied with your other Integra/Onkyo components.
• While Zone 2 is on, the System On/Auto Power On and Direct
Change
u
functions do not work.
Connecting Integra/Onkyo
u
Components
Step 1:
Make sure that each Integra/Onkyo component is con-
nected with an analog audio cable (connection
C
in the
hookup examples) (
➔
16
).
Step 2:
Make the
u
connection (see illustration below).
Step 3:
If you’re using an RI Dock, or cassette tape deck,
change the Input Display (
➔
23
).
L
R
IN
BD/DVD
L
R
IN
TV/CD
L
R
REMOTE
CONTROL
ANALOG
AUDIO OUT
L
R
ANALOG
AUDIO OUT
e.g., CD player
e.g., DVD player
