Functions
MLR 3G 2.0
10.3.2
Automatic Callback (Callback)
You can trigger an automatic callback to a predefined destination phone number of the
MLR 3G 2.0 with a data call or a phone call. You can configure authorized callers for these
numbers. The callers can identify themselves via the PPP authentication methods PAP or
CHAP, or via their CLIP phone number. The connection, which will then be established by
the MLR 3G 2.0, must be configured before in the menu "Dial-Out". Only connections to
the preconfigured dial-out destination are possible.
Configuration with the web interface
In order to
trigger a dial-out connection by a caller
, check in the menu "Dial-
In" on the page "Dial-In" the checkbox "Activate callback". The dial-out connec-
tion, which is triggered by a caller, must first be configured in the menu "Dial-
Out".
To enable callers to trigger a connection, they must either identify themselves
via PPP authentication or their phone numbers. Select either the radio button
for "After successful PPP authentication" or "After a call from these caller IDs".
If you select the latter option, enter up to 5 phone numbers into the fields on
the right, which can trigger a callback by calling.
Save your settings
by clicking "OK".
10.3.3
Routing
You can define routes for forwarding data packets in the MLR 3G 2.0. Moreover, you can
enable NAT for incoming and outgoing packets separately.
Configuration with the web interface
In order to
set a default route
, check in the menu "Dial-In" on the page "Rout-
ing" the checkbox "Set default route".
In order to
enable NAT for incoming packets
, check in the menu "Dial-In" on
the page "Routing" the checkbox "Activate NAT for incoming packets".
In order to
enable NAT for outgoing packets
, check in the menu "Dial-In" on
the page "Routing" the checkbox "Activate NAT for outgoing packets".
In order to
add a new route
, enter in the menu "Dial-In" on the page "Routing"
the "Net address" and the "Netmask " into the respective fields.
In order to
delete an existing route
, check in the menu "Dial-In" on the page
"Routing" under "Existing routs" the checkbox of the route(s) to be deleted.
Save your settings
by clicking "OK".
40
