MLR 3G 2.0
Functions
10.11
System Configuration
The MLR 3G 2.0 displays system data such as firmware version, serial number, hardware
revision or firmware checksum, together with short system messages about events and
errors in the menu "System" on the page "System data". This information is helpful and
should be known together with the configured IP address if you contact the support. Fur-
thermore, several links enable to display system states and connection logs. The dis-
played links depend on the configuration of the MLR 3G 2.0.
10.11.1
Displaying the System Log
The MLR 3G 2.0 allows to display the detailed system log in the menu "System" on the
page "System data". The number of displayed lines and the update interval can be con-
figured.
Configuration with the web interface
In order to
view the detailed system messages via the web interface
, click on
the link "Show the extensive system log".
In order to
configure the display of the system log
, enter on the page "System
log" into the field "Refresh after“ the update interval of the log in seconds as
well as into the field "show last … lines" the number of lines to be displayed
and select "OK".
10.11.2
Displaying the Last System Messages
The MLR 3G 2.0 displays short system messages about events and errors in the menu
"System" on the page "System data". For analysis purposes, you can dispaly the last mes-
sages of the MLR 3G 2.0 on the web interface.
Configuration with the web interface
In order to
display the last system messages of the MLR 3G 2.0
, click on the
link "Show the last system messages".
81
