Functions
MLR 3G 2.0
10.9.3
Configuring E-Mail Dispatch
The MLR 3G 2.0 can send an e-mail to any recipient on different, pre-defined events. An
attachment, which can be selected from different log files, can be attached to every e-
mail. Moreover, it is possible to attach the status page of the web interface to the mes-
sage text. The MLR 3G 2.0 allows to create and manage a series of different combinations
of recipient, event, attachment, and text.
Sending an e-mail is only possible if the access data for the e-mail account are entered
correctly in the menu "Messages" on the page "Configuration".
Configuration with the web interface
In order to
enable e-mail dispatch
, check in the menu "Messages" on the page
"E-mail" the checkbox "Activate e-mail messages".
In order to
create an e-mail message
, you have to define this in the section
"Create new e-mail". Enter the e-mail address of the recipient into the field
"Recipient" for this. Select from the drop-down list "Event" the respective
event for triggering the e-mail dispatch. Select from the drop-down list "At-
tachment" the respective log file to be attached to the e-mail. If this file is not
present on the MLR 3G 2.0, the e-mail will be sent without attachment. Check
the checkbox "Attach current status to message text", if the status page of the
web interface is to be attached to the message text. Enter the message text
into the field "Text".
Save your settings
by clicking "OK".
In order to
temporarily switch off e-mail messages
, uncheck in the section
"Existing e-mails" the check box in the column "active" in the e-mail message
overview. Click on "OK" to confirm the settings.
In order to
delete one or more e-mail messages
, check in the section "Existing
e-mails" the check box in the column "delete" in the e-mail message overview.
Click on "OK" to confirm the settings.
72
