Battery use
ATTENTION: Observe the battery charge maintenance instructions
First use:
The batteries are rechargeable Lithium-Ion (Li-ion). Before using it for the first time
the device must receive a full battery charge.
In order to do this, the equipment needs to be connected to an electric current for at
least eight hours.
To charge the battery connect the charger to the lateral connector in the device
and then to the electric current.
Time for full battery charge = 5 hours.
The device blocks any operation on the patient when connected to the electric
current.
Occasional use:
Even when disconnected (stand-by), the Eazy PRO executes internal routines
checking the status of the equipment. In spite of this procedure entailing a low power
consumption, the battery charge may be consumed.
Therefore, whenever the device has not been connected to an electric current for
more than 20 days, it is advisable to execute a full battery charge. If this procedure is
not performed, there is a risk of draining the battery and consequently being unable to
use the Eazy PRO in its portable configuration (not connected to the electric current).
Replacement:
Every battery has a determined shelf life, which is the possible quantity of
full charge and discharge cycles, without loss of performance (see battery
specifications in chapter 8). When the device presents a drop in battery
performance, with low autonomy, please request a new unit from Instramed’s
technical assistance.
The batteries are rechargeable Lithium-Ion (Li-ion). The battery can be removed
by the side opening, in the lower left part identified by the symbol
(see picture
on page 22). Remove the screw, unplug the connectors from the battery, remove it
and replace it with the new set, observing the correct position of the connectors and
making sure the lid remains steady.
Battery replacement is recommended every 02 (two) years or when the runtime is less
than 01 (one) hour.
III
