Page 3 of 24 Rev: 6/19/2013 10:26 AM
About Keypad Dimmer
Congratulations on your purchase of the elegant, high quality Keypad Dimmer. This in-wall switch with a built-in
dimmer can control up to 6 or 8 INSTEON/X10 scenes. Additionally, each button has an LED that can be easily
configured as a status indicator for virtually any INSTEON device/scene you wish to monitor. Finally, it comes
equipped with INSTEON’s patented dual-band communication technology for the most simple, reliable, brilliant
remote control available.
Features and Benefits
-
Integrated dimmer featuring 32 dim levels and 32 ramp rates
-
Wires in behind existing wall switch or in fixture box (requires neutral wire)
-
Compatible with latching, single momentary and dual momentary switches
-
Sense wires allow local control from any standard wall switch
-
Can contain up to 400 controller/responder links
-
X10 compatible
-
All settings preserved in non-volatile memory, even through power failures
-
Beeper for easy setup assistance; can also function as a chime module
-
Local programming lockout available via software
-
2-year warranty
Before Installation
CAUTIONS AND WARNINGS
Read and understand these instructions before installing and retain them for future reference.
This product is intended for installation in accordance with the National Electrical Code and local regulations in the United States or the
Canadian Electrical Code and local regulations in Canada. Use indoors only. This product is not designed or approved for use on power lines
other than 100VAC- 277VAC 50/60Hz, single phase. Attempting to use this product on non-approved power lines may have hazardous
consequences.
-
Use only indoors or in an outdoor rated box
-
Be sure that you have turned off the circuit breaker or removed the fuse for the circuit you are installing this product into. Installing this
product with the power on will expose you to dangerous voltages.
-
The wires connecting Keypad to the incoming power must be protected by a fuse or circuit breaker of 20A or less.