![background image](http://html1.mh-extra.com/html/insteon/2334-232/2334-232_owners-manual_2069909012.webp)
Page 12 of 24 Rev: 6/19/2013 10:26 AM
d. Tap Switch X’s Set button.
Switch X LED will beep and its LED will stop blinking.
3) Test the group by controlling the load from each switch.
The load(s) and all switches will remain in synch.
Changing Button Modes (Toggle/Non-Toggle Mode)
You can change any button to any one of 3 button modes (we recommend using home-management software such as
HouseLinc):
•
Toggle
– toggles between on and off commands each time it is tapped
•
Always On
– sends on every time it is tapped
•
Always Off
– sends off every time it is tapped
Note: You cannot change the dedicated ON and OFF buttons in 6-button configuration.
1) Tap the scene button you want to change.
2) Press and hold Keypad’s Set button until it beeps.
The scene button’s LED
will begin blinking and Set button LED will blink green.
All illuminated LEDs on Keypad will brighten to 100%.
3) Press and hold Keypad’s Set button it beeps again.
The button LEDs
will continue blinking and Set button LED will blink red.
4) Press and hold Keypad’s Set button until it beeps a third time.
The button LEDs
will stop blinking.
The button function rotates to the next mode in the cycle: Toggle
→
Always Off
→
Always On
→
Toggle.
5) Tap the button several times to confirm it is now in the desired state.
6) If you wish to rotate button mode again, return to step 2.
Adjust LED Brightness
Keypad’s LEDs can be set to any one of 32 brightness levels.
6-Button Configuration
1) Simultaneously tap the A and D buttons
Keypad will beep
2) Press and hold the On (brighter) and Off (dimmer) buttons to adjust LED brightness
3) When you have reached the desired brightness, simultaneously tap the A and D buttons again.
Keypad will beep
8-Button Configuration
1)
Simultaneously tap the C and F buttons.
Keypad will beep
2)
Press and hold the On button to adjust the LED brightness. (Each press and hold will toggle between
brightening and dimming)
3)
When you have reached the desired brightness, simultaneously tap the C and F buttons
Keypad will beep