INSTEON 2334-232, Owner'S Manual

Page: 17 / 24

Page 17 of 24 Rev: 6/19/2013 10:26 AM
seconds. However, when using home-management software such as HouseLinc, the ramp rate may be configured
anywhere from 0.1 seconds to 8 minutes. Follow the instructions below to manually change the local ramp rate.
1) Adjust the connected light(s) to brightness corresponding to the desired Ramp-Rate
Brightness Level Ramp-Rate in Seconds
90-100% 0.1
77-87% 0.2
65-74% 0.3
52-61% 2.0
39-48% 2.0
26-35% 4.5
13-23% 6.5
1-10% 8.5
1% 9.0
2) Double-tap the Set button on your Keypad
Keypad will double-beep
3) Test the Ramp-Rate settings by tapping the On/Off buttons on your Keypad or Controller.
Connected lights will ramp up and down at the new rate.
4) Start again if the ramp rate is not as desired or, if your double tap was not fast enough, you may have accidentally
changed the Local On-Level instead of the Local Ramp-Rate (note: software allows you to set the on levels and ramp
rates exactly as desired and consistently around the house)
Additional Resources
Find home automation solutions, helpful tips, interactive demos, videos, user forums, and more at the Smarthome
Learning Center:
www.smarthome.com/learningcenter.html
Helpful Videos
- Changing Keypad Buttons
- Adding LED Diffusers to the Keypad
Optional Accessories
Accessories Link
Custom Etched and Pre-
Printed Buttons
http://www.smarthome.com/_/ProductResults.aspx?Ntt=custom%20etch
ed%20buttons
Color and 6/8-button
Change Kits (15)
http://www.smarthome.com/_/ProductResults.aspx?Ntt=Keypad%20butt
on%20change%20kit
Blank Buttons
http://www.smarthome.com/2401BT10/Blank-10-Button-Set-for-Keypad-
White/p.aspx
Clear Buttons
http://www.smarthome.com/2401CLB/6-or-8-Button-Change-Kit-for-
Keypad-Clear/p.aspx
LED Color Change Kit
http://www.smarthome.com/2401L/LED-Color-Change-Kit-for-Keypad-4-
Color/p.aspx