Inspur TS860M5, User Manual

Page: 30 / 135

24
6 Hardware Options Installation
6.1 Introduction
If more than one option is being installed, read the installation instructions for all the
hardware options and identify similar steps to streamline the installation process.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
6.2 Processor Option
CAUTION: To avoid damage to the processor and system board, only authorized personnel
should attempt to replace or install the processor in this server.
To help avoid damage to the processor and system board, do not install the processor
without using the processor installation tool.
CAUTION: To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
CAUTION: To install a faster processor, update the system ROM before installing the processor.
To install the component:
1. Power down the server.
2. Extend the compute node from the rack.
3. Remove the top cover of the node.
4. Remove the air baffle.
5. Remove the heatsink.
6. Install the processor:
Step 1: Align the Clip’s triangle mark with the CPU’s corner mark, and then assemble the Clip
and CPU together.