20
#
Item
#
Item
12 VPP Connector
38 OCPA_CPU0 Slot
13 SGPIO Connector
39 VGA Port
14 Sensor Connector
40 BMC Management Network Port
15 Front Backplane Power
Connector × 4
41 USB 3.0 Port
16 I
2
C Connector × 2
42 Onboard X710 10G Network Ports
17 SLIM0_CPU1 Connector
43 PCIe_CPU1 Slot
18 SLIM1_CPU1 Connector
44 Leakage Detect Connector × 2
19 Left Control Panel Connector
45 Power Button/LED
20 I
2
C Connector × 2
46 System/BMC Serial Port
21 Intrusion Switch Connector
47 UID Button with LED
22 SLIM0_CPU0 Connector
48 PCIe1_CPU1 Power Connector
23 SLIM1_CPU0 Connector
49 PCIe0_CPU1 Slot
24 SYS_TF Card Slot
50 Right Control Panel Connector
25 Debug Connector
51 I
2
C4_GPU4 Connector
26 SATA Connector × 2
52 I
2
C Connector
3.4
Motherboard Jumper Introduction
It is required to shut down the system and disconnect the power supply during
CMOS clearing.
CMOS clearing will restore default settings of BIOS setup except system date and
time.
See Motherboard View for the jumper location.
Table 3-2 CMOS Jumper Cap
Item
Description
Function
J122
(CLR_CMOS)
CMOS clear jumper
Short-circuit pins 1-2 to restore to
normal status; short-circuit pins
2-3 to clear the CMOS setting.
To reset/clear the CMOS setting via a jumper:
1.
Power down the server and unplug the power cable from the electrical outlet.
2.
Wait for 5 seconds.
