48
Make sure the release tabs on both ends of the DIMM slot are fully opened.
1.
Take the new DIMM out from the memory box.
2.
Align the bottom notch with the receptive point on the slot. Use two thumbs
together to press both ends of the DIMM straight down into the slot until it snaps
into place.
Figure 4-40 Installing the DIMM
3.
Install the crossbar.
4.
Install the air duct.
5.
Install the access panel.
Figure 4-41 DIMM Slot Layout
Only DIMMs of the same type could be used in the same machine. Detailed DIMM
population and combination principles are as follows:
