41
Figure 4-27 Installing Samsung E1.S Drive to the Tray
Figure 4-28 Tightening Screws Securing E1.S Drive to the Tray
3.
Install the drive module into the chassis, and close the lever to secure the module
in place.
4.4.9
M.2 Drive Replacement
The server does not support hot-swap M.2 drives.
1.
To remove the M.2 drive of 8 × 2.5-inch + 2 × E1.S + 2 × M.2
Configuration:
1.
Press the release latch to release the lever.
