TD-BD-SDCMPTestC User
’
s Manual
59
Rev.1.01
7.3.3.2. Output Current Tab
Figure 7-24 shows a GUI window of the Output Current test. This tab operates of the measurement of
current consumption.
Figure 7-26 A GUI window of Output Current
Steps:
1. Enter an appropriate SD side block address in the
“
Block Address
”
by hexadecimal.
2. Enter an appropriate block count in the
“
Block Count
”
by hexadecimal.
3. Enter an appropriate value in the
“
Loop Count
”
by hexadecimal.
4. Select a voltage from the
VDD
field.
5. Select a type of access from the
Access
field.
Initialize: Initialize the SD card using a selected VDD and the Loop Count are repeated.
Erase:
Erase an SD card using SD Block Address and Block Count and the Loop Count are
repeated.
Write:
Write data to the SD card using SD Block Address and Block Count and the Loop
Count are repeated.
Read:
Read data from the SD card using SD Block Address and Block Count and the Loop
Count are repeated.
6. Select a slot and CurrentLimit(using only UHS mode)
