TD-BD-SDCMPTestC User
’
s Manual
10
Rev.1.01
Do not use or place the product in the following locations.
●
Humid and dusty locations
●
Airless locations such as closet or bookshelf
●
Locations which receive oily smoke or steam
●
Locations exposed to direct sunlight
●
Locations close to heating equipment
●
Closed inside of a car where the temperature becomes high
●
Static electricity locations
●
Locations close to water or chemicals
Otherwise, a fire, electric shock, accident or deformation may occur due to a short circuit or heat
generation.
Do not place heavy things on the product.
Otherwise, the product may be damaged.
■
Disclaimer
This system is the test tool for SD compliance. Tokyo Electron Device Limited assumes no responsibility
for any damages resulting from the use of this product for purposes other than those stated.
Even if the product is used properly, Tokyo Electron Device Limited assumes no responsibility for any
damages caused by:
- Earthquake, thunder, natural disaster or fire resulting from the use beyond our responsibility, acts by a
third party or other accidents, the customer
’
s willful or accidental misuse or use under other abnormal
conditions,
- Secondary impact arising from use of this product or its unusable state (business interruption or
others),
- Use of this product against the instructions given in this manual or
- Malfunctions due to connection to other devices.
Tokyo Electron Device Limited assumes no responsibility or liability for:
- Erasure or corruption of data arising from use of this product
- Any consequences or other abnormalities arising from use of this product, or
- Damage of this product not due to our responsibility or failure due to modification
Caution
!
!
