TD-BD-SDCMPTestC User
’
s Manual
25
Rev.1.01
Each information becomes effective for "Ready" STATUS after initialization ends. Moreover,
this system doesn't detect Insert/Removal of the card in the automatic operation. It keeps
displaying previous information even if the card is pulled out. So it needs to execute
Initialization (the following description) again.
1. SD Card Slot Number
It is composed of the button that executes the pull-down menu and the initialization to
select the SD slot number. Slot1 and Slot2 are selected, and SD Card is initialized.
2. Current Limit
It is a text box that displays the setting of Current Limit after initialization ends. The
displayed content is as follows.
Display
Content
Uninitialized
It is shown that it is before executing initialization.
Undefined
It is shown that it is SD memory card in which initialization ends normally,
and Current Limit is not defined.
200mA
It is shown to have been initialized with Current Limit 200mA.
400mA
It is shown to have been initialized with Current Limit 400mA.
600mA
It is shown to have been initialized with Current Limit 600mA.
800mA
It is shown to have been initialized with Current Limit 800mA.
3. SD Card Capacity
The capacity of the card is shown. It is displayed by the unit of 512Byte in the upper side,
and it is displayed by the unit of KByte in the lower side.
4. SD Card Status
It is a text box that displays the state of initialization. The displayed content is as follows.
Display
Content
Uninitialized
It is shown that it is before executing initialization.
Ready
It is shown that initialization ends normally, and the content of each
information text box is effective.
Not Insert
It is shown not to be able to detect the card at initialization.
Failed
It is shown that initialization failed.
5. IO Drive Strength Support
Support information on IO Drive Strength is displayed. The displayed content is as follows.
Display
Content
Undefined
It is shown that it is SD memory card of Version in which IO Drive Strength
is not defined. (before Version3.0)
Unsupported
It is shown not to support corresponding DriveStrengthType.
Supported
It is shown to support corresponding DriveStrengthType.
