TD-BD-SDCMPTestC User
’
s Manual
37
Rev.1.01
7.2.3.4. Delay Settings Tab
Figure 7-9 shows a GUI window of the Delay Settings tab.
Figure 7-11 Delay Settings Tab
This tab sets the delay time between the clock edge and the start of output data to a SD Memory card.
The Delay Time in this setting refers to a delay time starting at the rising edge of the SD clock except
DDR50 mode. In DDR50 mode, the delay time refers to a delay time starting at both edges.
The user can run a test within the range of Min to Max values that have been set using this tab. A
32-stage (Only DDR50 mode is a 16-stage) Delay Time value is available depending on clock
frequency. The Delay Time values available for each operation frequency are shown in Table 7-2.
Moreover, some values can be excluded according to the skip function. If it clicks the "Delay Skip"
check box, it can be selected the excluded range from the pull-down menu of Min and Max.
