4 1.Safety
ED.
2010/11
The valve / actuator has rotating parts. Fit the head with great care, and do not put either hands or
fingers on the piston area, or on the indicated areas when this is connected up to the compressed
air. Failure to do so could produce serious injuries.
NEVER sprinkle the internal parts of the head with water. Position the cover and secure it with the
screws that have been supplied after doing any maintenance work.
1.4.3.
1.4.4.
During Maintenance
You must always bear in mind the
Technical Specifications
set forth in Chapter 8.
NEVER strip the control head if the valve or installation is in service. Make sure that the compressed
air supply has been shut off.
Do not leave loose parts on the floor.
All electrical work must be carried out by duly authorised personnel.
1.4.5.
1.4.6.
Compliance with the instructions
Any failure to comply with the instructions could endanger the operators, the environment and the machine, and could result in
the loss of any rights to claim damages.
Failure to observe these instructions could carry the following risks:
•
Serious operational failure of the machine / plant.
•
Specific maintenance and fault repair procedures.
•
The threat of electrical, mechanical and chemical risks.
•
The environment may be endangered by the substances released.
1.5.
GUARANTEE
Any guarantee will immediately become fully null and void, and what is more, we will be fully compensated for any civil liability
claim made against us by third parties, in the event that:
•
The installation and maintenance work has not been carried out in accordance with the instructions set forth in this
manual.
•
The repairs have not been carried out either by a member of our staff, or have been done without our company having
issued prior written authorisation.
•
The parts used are not original INOXPA pieces.
•
Modifications have been carried out without prior written consent.
•
The material has been badly, incorrectly or negligently used, or has not be used in accordance with the instructions and
end set forth in this manual.
The general delivery conditions already in your possession also apply
Should you have any doubts or require more in-depth explanations about particular data (adjustments, assembly, stripping...)
please do not hesitate to contact us.
