18
8.Technical Specifications
ED. 2010/11
8.
Technical Specifications
8.1.
TECHNICAL SPECIFICATIONS
MATERIALS
Base
PPO + GF, blue
Cover
PC, transparent, blue-grey
Seals EPDM
Weight
560 – 640 gr.
PNEUMATIC SPECIFICATIONS
Connections
Air inlet:
G 1/8" – is supplied with snap-fit plug for 6/4 pipe
Air vent:
G 1/8" – is supplied with silencer
Air outlets:
G 1/8" – is supplied with snap-fit plug for 6/4 pipe
Fluid
lubricated compressed air, neutral gasses according to DIN ISO 8573-1
Cont. max. oil 1
ppm
Fluid max. temp 50ºC
(155ºF)
Work pressure
1.5 to 7 bar (22 to 102 PSI)
Nominal flow
150 Nl/min (to 6 bar, 20ºC and 1 bar differential pressure)
(to 87 PSI, 74ºF and 87 PSI differential pressure)
Run minimum
3
mm
maximum
70
mm
ELECTRICAL SPECIFICATIONS
Protection
IP 65/67 according to EN 60529
Supply voltage
DC
24V or by means of AS-i bus
AC
24/110/220V
Connections
3 options:
•
threaded terminals with M16 cable gland (standard version)
•
multipin connector
•
AS-i bus.
Solenoid valves:
(the C TOP can fit up to 3 solenoid valves.)
Type
3/2 Valve (normally closed)
Air pressure
1.5 to 7 bar (22 PSI a 101,5 PSI)
Consumption
DC: 0.55 W
AC:
1.9
VA
Response time
≤
25 ms
Optical indicator
Red
Led
Peak suppressor circuit
Position indicators (Inductive)
Voltage
5....25V DC PNP
Consumption
2,1 mA
(signal)
Protection
IP
67
In order to assure the good valve performance, it is essential that the compressed air be supplied in
accordance with the conditions described herein. Contrariwise, irreparable damage may be caused
to the material.
