Inovance SV820N Series, Manual

Page: 68 / 181

- 67 -
4 Operation Panel
4
Chapter 4 Operation Panel
4.1 Operation Panel Composition
Figure 4-1 Appearance of the LED operation panel
LED display
area
Operation
buttons MODE SET
SEL IDH IDL
The operation panel of the SV820N servo drive consists of an LED (6-digit, 7 segments) and 6 buttons. The
operation panel is used for the servo drive display, parameter setting, user password setting and general
functions operations. When the operation panel is used for parameter setting, the functions of the buttons
are described as follows.
LED display area
There are 6 digits on the LED. The LED displays common states, parameters and the axis number currently
operated.
Operation buttons
Table 4-1 Functions of buttons
Button Button Name Button Function
MODE
MODE
Switch between all modes.
Return to upper-level menu.
INCREMENT Increase the value of the blinking digit for the LED.
DECREMENT Decrease the value of the blinking digit for the LED.
SHIFT
Shift the blinking digit for the LED.
View the high digits of the number consisting of more than 5 digits.
SET
SET
Switch to the lower-level menu.
Execute commands such as storing parameter setting value.
SEL
SEL
Select specific axis number and operate corresponding parameters of
current axis number.