Application Guidelines
Using Smart CLI
200R204-000
Innovx FastSwitch Ethernet Switch
A-3
Issue 2
Installation and Operation Manual
Using Smart CLI
The Smart CLI commands can be executed from a hyperterminal connection, a password-protected
Telnet connection or at the web interface. When using CLI at the web interface, be aware that you
will not be able to execute those commands that are restricted to the ADMIN mode.
The command line interface is composed of commands, zero or more subcommands and zero or
more arguments. The general syntax of a command entered at the command prompt is:
command
<subcommand(s)>
if any
<required argument(s)>
if any
Finding Commands and Subcommands
Use the
?
character to get a description of commands available, or at any time in the command
line to get context help. The syntax of a help description is:
command
Brief description of command or subcommand
parameter(s)
description, if any, for the command or subcommand
•
When you type the
?
character at the beginning of a command line, the screen displays all the
commands available along with a one line description of each command:
FastSwitch%> ?
_______________________FastSwitch Commands___________________________
clear Reset functions
configure Configure system parameters
default Default configuration to factory values.
disable Turn off supervisor/admin commands
enable Turn on supervisor/admin commands
help Description of the command line interface and help system
ping Send ping to remote device
show Show system parameters
_______________________Utility Commands___________________________________
batch Store and/or run commands in batch mode
exit Exit SpectraComm IP Command Line Interface
flash Copy flash files/select flash boot file
reboot Halt and perform a reboot
services Enable/Disable HTTP. SNMP, & TFTP Services
|_______________________Notes______________________________________________
Commands may be abbreviated. Command text expands when space is entered.
Use "?" at any time on the command line to get help. Use CTRL-C to abort
command line. Use Up/Down arrow keys to recall previous command lines.
•
When you type
show
the screen displays help for only the
show
command:
FastSwitch%> show
show Show system parameters
Summary of Contents for FastSwitch
Page 61: ......
