manualshive.com logo in svg

Innovx FastSwitch 24, Installation And Operation Manual, Page: 80 / 122

Share
Download
Innovx FastSwitch 24 Installation And Operation Manual Download Page 80

The Console Menu Line

Reboot Switch Menu

4-26

Innovx FastSwitch 24 Ethernet Switch

200R205-000

Installation and Operation Manual

Issue 3

Reboot Switch Menu

Default

Resets switch to default configuration. Selecting this menu item will cause the following message 
to appear:

Resetting to the default will restart the system automatically!

Do you want to continue?

If you type "Y", the switch will load default configuration. After finished loading the default 
configuration, the switch will reboot automatically.

Restart

Reboots the switch in software reset.

TFTP Update Firmware

This screen is used to download firmware and upload/download the configuration database.

Figure 4-26

TFTP Update Firmware Configuration

TFTP Update Firmware Screen

This screen is used to update the firmware, using TFTP.

1. Start the TFTP server, and copy firmware update version image file to TFTP server.

2. Press <Edit> on this page.

3. TFTP Server: Type the IP of TFTP server.

4. Remote File Name: Type the image file name.

5. Press Ctrl+A go to action line.

6. Press <Save> key, it will start to download the image file.

7. When saved successfully, the image file gets downloaded.

8. Restart switch.

Summary of Contents for FastSwitch 24



























































































































Reviews:

No comments