ELITE
Installation guide
Chapter 2: Mailboxes & other features
76
Did you remember to?
The following checklist summarizes the important procedures described in
Chapters 1 and 2. Use the checklist to make sure you have installed the Elite
system properly.
If you have questions about any part of the installation, call Innovation at the
number shown on the back of this guide.
Did you remember to:
Add an administrator?
Check your voice ports and port types and enter each port extension?
Adjust the Call ID Format string, if necessary (based on port type)?
Set the MWI dial-strings and test message lamps?
Test any device interfaces?
Add Front Desk mailboxes?
Add an Administration mailbox?
Adjust the Maximum Mailbox Number Size, if necessary?
Add Translations if guest rooms have two extensions each?
Create a guest service menu (AGS), if necessary?
Set up automated attendants, if necessary?
Check or add the fax number to which reports will print?
Test the modem’s dial-out capability using the Atomic Clock feature?
To perform this test, see
System atomic clock
in Chapter 3.
Choose how failed wake-up calls will notify the front desk staff (if Elite
performs wake-up calls)? )? You can notify a particular extension of all
failures, send a fax as the notification, print a report or send the notification
to an email address as explained in the
Wake-up calls
section of Chapter 3.
Connect the UPS data cable to a USB port on the back of the system?
Configure the number(s) or email addresses for Alerts?
