Innovation Technologies ELITE Installation Manual Download

Page: 57 / 188

ELITE

Installation guide

Chapter 2: Mailboxes & other features

The Key 1 Mailbox is referencing

DIRECTIONS

. Since you want to give the

caller directions to the hotel from two locations (from downtown or the airport),
you will create a

Menu

mailbox.

2. Click the Menu option in the Select New Mailbox Type window and then

click OK.

3. In the next window, enter the word DIRECTIONS as the mailbox ID, and then

click OK.

The following window appears.

Now you need to write a script for a prompt that explains the direction choices.

4. Enter a file name (e.g., AA1SUB1D) in the Menu Prompt field and then click

the button next to the field.

5. In the Script field of the next window, enter a script like the one shown in the

following illustration.

Summary of Contents for ELITE





























































































































































































Search results

Summary of Contents for ELITE

Reviews:

Related manuals for ELITE

Brands by name

Popular brands

Innovation Technologies ELITE, Installation Manual

Search results

Summary of Contents for ELITE

Reviews:

Related manuals for ELITE

Brands by name

Popular brands