Innovation Technologies ELITE Installation Manual Download

Page: 161 / 188

ELITE

Installation guide

Chapter 3: Reference

153

Hotel Claritin Downtown Chicago #

Quest2

Now say your name, title and employer’s name.

David Smith, GM, Hotel Claritin

Quest3

What is the call back number at which you can
now be reached, including area code?

312-555-1212

Quest4

Finally, please give a brief description of the
problem you have encountered.

The system is currently down.

System

Prompt

To accept the responses you gave, press 1. To listen to
your responses, press 2. To start over again, press 3.

Or to cancel entirely, press ‘star’.

System

Prompt

(Hotel Claritin Downtown Chicago) (David
Peterson, GM, Hotel Allegro) (312-555-1212)
(The system is currently down.)

To accept the responses you gave, press 1. To listen to
your responses, press 2. To start over again, press 3.

Or to cancel entirely, press ‘star’.

Finishes at this point:

Success

Thank you. An Innovation Customer Support
representative will contact you shortly.

(two second pause)

Cancel

Canceled. This incident has not been submitted
to Customer Support.

(two second pause)

A voice message will be generated using the caller’s recorded responses to each
question. An example message might sound something like this:

“Customer Support has received a call for Hotel Claritin Downtown
Chicago, by David Smith, GM, Hotel Claritin, at telephone number 312-

555-1212. The incident message left was: The system is currently down.”

Summary of Contents for ELITE





























































































































































































Search results

Summary of Contents for ELITE

Reviews:

Related manuals for ELITE

Brands by name

Popular brands

Innovation Technologies ELITE, Installation Manual

Search results

Summary of Contents for ELITE

Reviews:

Related manuals for ELITE

Brands by name

Popular brands