Innovation Technologies ELITE Installation Manual Download

Page: 112 / 188

ELITE

Installation guide

Chapter 3: Reference

104

Parameter

Description

Range

Default

Re-occurring?

When this box is checked, users can
program their wake-up call to repeat daily.

N/A Checked

Staff

mailboxes?

When this box is checked, staff mailboxes
can set wake-up calls for themselves if staff
members press the pound (#) key at the
main menu.

N/A Not

checked

Auto-answer

phones?

If guest or staff phones are set up to
automatically answer calls from voice mail,
use this feature to make the system play
the wake-up message immediately. An
answer delay may be adjusted to avoid
clipping at the beginning of this message.

N/A Not

checked

Failure Notification tab

Parameter

Description

Range

Default

Notification

called to

The extension that will be notified after a
failed wake-up call. Generally front desk
extensions (not forwarded to voice mail)
are used.

Valid PBX
stations

0 (operator)

Maximum

Attempts

This controls how often 2020 will call the
station that is set up to receive notifications
of failed wake-up attempts.

1 to 20
attempts

Retry Interval

This setting controls the wait time between
notification attempts.

1 to 20
minutes

1 minute

Language

This setting controls the language to use to
announce the wake-up failure notification.

Valid
languages

English

Notification

faxed to

The number that will be called to send a
fax of a wake-up failure notification report.

Valid fax
number

Notification

Emailed to

The email address that will receive the
wake-up failure notification report.

Valid
email
addresses

None

Notification

printed on

This setting controls where the wake-up
failure notification report is printed.

Valid print
devices

None

Report Options tab

Parameter

Description

Range

Default

Sort by

This setting controls how wake-up
information is displayed on the report.

Mailbox
or Wake-
up Time

Wake-up
Time

Summary of Contents for ELITE





























































































































































































Search results

Summary of Contents for ELITE

Reviews:

Related manuals for ELITE

Brands by name

Popular brands

Innovation Technologies ELITE, Installation Manual

Search results

Summary of Contents for ELITE

Reviews:

Related manuals for ELITE

Brands by name

Popular brands